CAD CAM EDM DRO - Yahoo Group Archive

Re: tuning a thread on a lathe

Posted by marble_h@y...
on 2001-02-28 17:35:06 UTC
Rich:
thanks a lot time to turn some swarf!!!!!!

John




In CAD_CAM_EDM_DRO@y..., "Rich D." <cmsteam@a...> wrote:
> John,
> I scanned a threading chart and put it in the "Files" area of this
list:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> It's from a well known manual ;o)
> Enjoy, Rich D.
>
> marble_h@y... wrote:
> >
> > Hi group would someone by anychance have a chart on the depth of
the
> > thread for NC and Nf threads .I lost my book
> >
> > thanks group
> >
> > John
> >
> > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> --
> -==Rich=-=Colorado Midland Railway=-
=<http://www.geocities.com/cmsteam/>

Discussion Thread

marble_h@y... 2001-02-28 13:34:20 UTC tuning a thread on a lathe Rich D. 2001-02-28 16:29:02 UTC Re: [CAD_CAM_EDM_DRO] tuning a thread on a lathe marble_h@y... 2001-02-28 17:35:06 UTC Re: tuning a thread on a lathe