goodies for sale NOT!!
Posted by
carlcnc@s...
on 2001-03-02 21:15:33 UTC
As to those linear servos I was offering.[H is a magnetic force/at
distance symbol]
Turns out these motors are linear steppers! The guys at Applied
Motion Products nailed it when I referred to them as 'Sawyer
Principle" motors.
The told me bi-polar chopper drives will do the trick.
I will try a gecko first. If not enough current then I will be looking
for some 10-15 amp capable half step drivers.
I will post some test results in a few days.
thanks for alll the help
Carl
distance symbol]
Turns out these motors are linear steppers! The guys at Applied
Motion Products nailed it when I referred to them as 'Sawyer
Principle" motors.
The told me bi-polar chopper drives will do the trick.
I will try a gecko first. If not enough current then I will be looking
for some 10-15 amp capable half step drivers.
I will post some test results in a few days.
thanks for alll the help
Carl
Discussion Thread
carlcnc@s...
2001-03-02 21:15:33 UTC
goodies for sale NOT!!
cncrouterusa@n...
2001-03-03 11:30:34 UTC
Re: [CAD_CAM_EDM_DRO] goodies for sale NOT!!