Re: [CAD_CAM_EDM_DRO] RE: Dead Grizzly speed control/VFD
Posted by
Dan Mauch
on 2001-03-05 07:28:56 UTC
I have worked on several Variable speed controllers like the infamous
treadmill motors with VSC and found the parts tend to unsolder themselves.
The symptoms are just like you mentions. Works fine, works erratic, starts
next day, then nothing.
Look for a bad solder joint with power disconnected.
Dan
treadmill motors with VSC and found the parts tend to unsolder themselves.
The symptoms are just like you mentions. Works fine, works erratic, starts
next day, then nothing.
Look for a bad solder joint with power disconnected.
Dan
Discussion Thread
John Murphy
2001-03-04 18:16:16 UTC
Dead Grizzly speed control/VFD
Ray
2001-03-05 05:16:04 UTC
Re: Dead Grizzly speed control/VFD
ron ginger
2001-03-05 06:50:58 UTC
RE: Dead Grizzly speed control/VFD
Dan Mauch
2001-03-05 07:28:56 UTC
Re: [CAD_CAM_EDM_DRO] RE: Dead Grizzly speed control/VFD
John Murphy
2001-03-05 16:52:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dead Grizzly speed control/VFD
ballendo@y...
2001-03-06 05:15:13 UTC
Re: Dead Grizzly speed control/VFD
Ray
2001-03-06 06:01:11 UTC
Re: Re: Re: Dead Grizzly speed control/VFD
John Murphy
2001-03-06 11:07:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Dead Grizzly speed control/VFD
Jon Elson
2001-03-06 11:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Dead Grizzly speed control/VFD
ron ginger
2001-03-07 10:18:40 UTC
Re: Dead Grizzly speed control/VFD
ballendo@y...
2001-03-09 10:00:50 UTC
minimill thoughts was Re: Dead Grizzly speed control/VFD
Carlos Guillermo
2001-03-09 11:55:18 UTC
RE: [CAD_CAM_EDM_DRO] minimill thoughts was Re: Dead Grizzly speed control/VFD
Alan Marconett KM6VV
2001-03-09 12:27:46 UTC
Re: minimill thoughts was Re: Dead Grizzly speed control/VFD
Carlos Guillermo
2001-03-09 13:11:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: minimill thoughts was Re: Dead Grizzly speed control/VFD
Smoke
2001-03-09 15:00:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: minimill thoughts was Re: Dead Grizzly speed control/VFD