Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages

Ballendo,

You must have seen four bar linkages before. If you haven't look them up in
some engineering text they are a fascinating study on their own. It is
amazing the types of motion you can achieve with four bars of unequal
lengths.

Now for your four bar linkage method, after the fourth bar linkage was
usually achieved but immediate separation was desired once you had sobered
up :-))

--Greg Nuspel

Wingcraft the core of great models.
http://www.wingcraft.com

----- Original Message -----
From: <ballendo@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, March 06, 2001 4:59 AM
Subject: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages


> Joe,
>
> 4 bar linkage. I don't know what this is, although I did provide a
> guess :-)
>
> Ballendo
>
>
> --- In CAD_CAM_EDM_DRO@y..., Joe Vicars <jvicars@c...> wrote:
> > To what term were you reffering?
> >
> > ballendo@y... wrote:
> >
> > > Joe,
> > >
> > > This is a new term to me. What is it?
> > >
> > > Thank you in advance.
> > >
> > > Ballendo
> > >
> > > P.S. Sounds like my 20's, where the Friday night motion path was:
> > > Go to the 1st bar, try to "come up with" linkage, Go to the 2nd
> > > bar...
> > > Eccentricities tended to enter the motion path at the 3rd and 4th
> > > Bars, and "linkage" was never assured... :-)
> > >
> > > --- In CAD_CAM_EDM_DRO@y..., Joe Vicars <jvicars@c...> wrote:
> > > > Can someone recommend a text, website, software, or any other
> > > utilities
> > > > for 4 bar linkages? I need a method of comming up with a 4 bar,
> > > knowing
> > > > the motion path.
> > > > Thanks
> > >
> > > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> > >
> > > Addresses:
> > > Post message: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > > FAQ: http://www.ktmarketing.com/faq.html
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>