CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages

Posted by Smoke
on 2001-03-06 09:11:57 UTC
Ah...the old parallelogram (never heard of it referred to as a fourbar
linkage before) .... somewhat different from four bars of UNEQUAL length
though.

Smoke

-----Original Message-----
From: Greg Jackson <jackson@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Tuesday, March 06, 2001 5:52 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages


>4 bar linkages are everywhere, but people don't normally recognize them.
>The parallel bar mechanism of an architect's style clamp on desk lamp is a
>4bar. The typical hydraulic door closer on commercial doors is a 4bar.
>The lift hinge on many auto hoods is a 4 bar. Most of the new "European
>style" kitchen cabinet hinges are 4 bar. The lift of an accessory outboard
>motor is 4 bar. If you can identify 4 hinges that all move in a linked
>fashion, it's probably a 4 bar.
>
>G. Jackson
>
>
>
>At 05:04 AM 3/6/01 -0700, you wrote:
>>Ballendo,
>>
>>You must have seen four bar linkages before. If you haven't look them up
in
>>some engineering text they are a fascinating study on their own. It is
>>amazing the types of motion you can achieve with four bars of unequal
>>lengths.
>>
>>Now for your four bar linkage method, after the fourth bar linkage was
>>usually achieved but immediate separation was desired once you had sobered
>>up :-))
>>
>>--Greg Nuspel
>>
>>Wingcraft the core of great models.
>>http://www.wingcraft.com
>>
>>----- Original Message -----
>>From: <ballendo@...>
>>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>>Sent: Tuesday, March 06, 2001 4:59 AM
>>Subject: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages
>>
>>
>>> Joe,
>>>
>>> 4 bar linkage. I don't know what this is, although I did provide a
>>> guess :-)
>>>
>>> Ballendo
>>>
>>>
>>> --- In CAD_CAM_EDM_DRO@y..., Joe Vicars <jvicars@c...> wrote:
>>> > To what term were you reffering?
>>> >
>>> > ballendo@y... wrote:
>>> >
>>> > > Joe,
>>> > >
>>> > > This is a new term to me. What is it?
>>> > >
>>> > > Thank you in advance.
>>> > >
>>> > > Ballendo
>>> > >
>>> > > P.S. Sounds like my 20's, where the Friday night motion path was:
>>> > > Go to the 1st bar, try to "come up with" linkage, Go to the 2nd
>>> > > bar...
>>> > > Eccentricities tended to enter the motion path at the 3rd and 4th
>>> > > Bars, and "linkage" was never assured... :-)
>>> > >
>>> > > --- In CAD_CAM_EDM_DRO@y..., Joe Vicars <jvicars@c...> wrote:
>>> > > > Can someone recommend a text, website, software, or any other
>>> > > utilities
>>> > > > for 4 bar linkages? I need a method of comming up with a 4 bar,
>>> > > knowing
>>> > > > the motion path.
>>> > > > Thanks
>>> > >
>>> > > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
>>> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>>> > >
>>> > > Addresses:
>>> > > Post message: CAD_CAM_EDM_DRO@y...
>>> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
>>> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
>>> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
>>> > > Moderator: jmelson@a... timg@k... [Moderator]
>>> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>> > > bill,
>>> > > List Manager
>>> > >
>>> > > FAQ: http://www.ktmarketing.com/faq.html
>>> > >
>>> > > Your use of Yahoo! Groups is subject to
>>> http://docs.yahoo.com/info/terms/
>>>
>>>
>>> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>>>
>>> Addresses:
>>> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>>> Moderator: jmelson@... timg@... [Moderator]
>>> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>> bill,
>>> List Manager
>>>
>>> FAQ: http://www.ktmarketing.com/faq.html
>>>
>>> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>>>
>>>
>>
>>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>>
>>Addresses:
>>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>>Moderator: jmelson@... timg@... [Moderator]
>>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>bill,
>>List Manager
>>
>>FAQ: http://www.ktmarketing.com/faq.html
>>
>>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Joe Vicars 2001-03-02 13:24:59 UTC 4 Bar Linkages Jeff Swayze 2001-03-02 13:38:32 UTC Re: 4 Bar Linkages ballendo@y... 2001-03-03 09:12:01 UTC Re: 4 Bar Linkages pjldesigns@h... 2001-03-04 13:08:40 UTC Re: 4 Bar Linkages Joe Vicars 2001-03-05 05:43:13 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages Greg Jackson 2001-03-05 10:53:20 UTC Re: [CAD_CAM_EDM_DRO] 4 Bar Linkages ballendo@y... 2001-03-06 03:59:17 UTC Re: 4 Bar Linkages Greg Nuspel 2001-03-06 04:26:21 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages Greg Jackson 2001-03-06 04:52:33 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages ballendo@y... 2001-03-06 05:38:13 UTC Re: 4 Bar Linkages (thank you) Smoke 2001-03-06 09:09:51 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages Smoke 2001-03-06 09:11:57 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Bar Linkages dkowalcz@i... 2001-03-06 13:01:32 UTC Re: 4 Bar Linkages