Re: [CAD_CAM_EDM_DRO] Re:Scopes
Posted by
Jon Elson
on 2001-03-25 22:16:46 UTC
mariss92705@... wrote:
that clamp and unclamp against a gold-plated circuit board. Good advice,
to avoid a unit that has any problems in the attenuators. They can sometimes
be fixed, with a jeweler's loupe and tweezers, if you have real steady hands.
They are pretty rugged if not abused, but if it gets dropped down a flight
of stairs, it's a lost cause.
Jon
> Hi,Yup, they have a plastic cam that operates a bunch of tiny leaf switches
>
> In my opinion the 465 was the best general purpose scope Tektronix
> ever made. It had excellent writing speed and focus. Its weakness was
> the voltage attenuators. These were easily prone to mechanical
> malfunction and rendered an otherwise working scope into junk because
> of the expense in replacing them.
that clamp and unclamp against a gold-plated circuit board. Good advice,
to avoid a unit that has any problems in the attenuators. They can sometimes
be fixed, with a jeweler's loupe and tweezers, if you have real steady hands.
They are pretty rugged if not abused, but if it gets dropped down a flight
of stairs, it's a lost cause.
Jon
Discussion Thread
Bradford Chaucer
2001-03-25 06:27:45 UTC
Re:Scopes
mariss92705@y...
2001-03-25 09:35:35 UTC
Re:Scopes
Alan Marconett KM6VV
2001-03-25 16:37:32 UTC
Re:Scopes
Jon Elson
2001-03-25 22:16:46 UTC
Re: [CAD_CAM_EDM_DRO] Re:Scopes