Option to the Servo-to-go card?
Posted by
Heuver, Brad (B.R.)
on 2001-03-27 05:11:47 UTC
Jon/Matt:
Do I understand correctly that this mother board, and the daughter
boards combined will perform the same duties as the Servo-to-Go card?
If so, it looks like it will lower the cost of a servo system by
over $350 - A substantial accomplishment!
Brad Heuver
Do I understand correctly that this mother board, and the daughter
boards combined will perform the same duties as the Servo-to-Go card?
If so, it looks like it will lower the cost of a servo system by
over $350 - A substantial accomplishment!
Brad Heuver
>From: Jon Elson
>
>I have also made up a set of boards that count encoder position and
>generate the velocity commands, and works off the PC's parallel port.
>It has been tested with EMC. See :
> http://www.artsci.wustl.edu/~jmelson/PPMC.html
>for more info. A 4-axis set of the 3 boards currently available will
>run about $500.