Re: [CAD_CAM_EDM_DRO] Control Box Isolation--Geckos

Todd, and those following this thread,

I am using servo motors on our plasma cutter that run on 18 volts. I know
that is the lower limit for the Geckos. I wonder if that could be related
to why I am having such jerky motion? We are using 32 pitch rack and 22
teeth pinions for drive. The jerkiness is in about .60 (real roughly) jerks
as the servo motors move.

Tom Eldredge

----- Original Message -----
From: <todmorg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, April 02, 2001 9:54 PM
Subject: [CAD_CAM_EDM_DRO] Control Box Isolation


> I have a cnc plasma table that I am mounting a control box on, with
> gecko 320's. Does the control box need to be isolated from the table
> and plasma cutter, or is grounding the box to the table the way to go?
> Thanks! Todd
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>