Re: [CAD_CAM_EDM_DRO] 4-axis EMC

Hi Jon,

You need the latest release of EMC which has the 6-axis capability. I have
applied this to Paul's BDI and it works fine.

Ian
--
Ian W. Wright
Sheffield UK
www.iw63.freeserve.co.uk

----- Original Message -----
From: "Jon Elson" <jmelson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: 05 April 2001 19:37
Subject: Re: [CAD_CAM_EDM_DRO] 4-axis EMC


>
>
> Ian Wright wrote:
>
> > Hi,
> >
> > I have placed files in the dropbox on www.linuxcnc.org which are
appropriate
> > for a stepper-driven mill working in 4 axes (3 linear and one rotary)
The
> > files are: mini4.ini, mini4.run,tkemc4, and Readme.txt
>
> Great! Thanks for the work! I have wanted to have the 4th, rotary axis
> capability for a long time. I assume this uses the latest version of the
> interpreter and kinematics routines. Is there a specific version of EMC
> that it needs to work?
>
> Thanks,
>
> Jon
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>