CAD CAM EDM DRO - Yahoo Group Archive

Re: Master5 Feed Rate OverRide

on 2001-04-15 14:26:15 UTC
--- In CAD_CAM_EDM_DRO@e..., "Art Fenerty" <fenerty@h...> wrote:
> Hi All:
>
> Master5 Release 1.61 now has Feed Rate OverRide. Within a week
the Demo should be updated with this new feature. Doug Fortunes
Breakout board with Potentiometer
> control will soon be implemented. It will give you the ability to
control feed rate from the machine with any pot 5k ->100k. This
control will vary the speed from approx 10% to 200% overfeed.
>
> Note: Use this with caution. It is possible to go faster than your
stepper motors permit.
>
> It will also be possible soon to import BMP,JPEG, etc for a
photographic engraving direct from the photo. Or to translate photo's
to G-Code.
>
> Art
>
> http://users.andara.com/~fenerty/master.html

Art,
The demo expired today.
Have you over looked this ?
JS.
>
>
> [Non-text portions of this message have been removed]

Discussion Thread

Art Fenerty 2001-04-15 11:04:45 UTC Master5 Feed Rate OverRide John Stevenson 2001-04-15 14:26:15 UTC Re: Master5 Feed Rate OverRide wanliker@a... 2001-04-15 16:46:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Master5 Feed Rate OverRide Art Fenerty 2001-04-16 12:36:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Master5 Feed Rate OverRide