Re: [CAD_CAM_EDM_DRO] Re: Master5 Feed Rate OverRide

John:

Sorry for the demo delay. I wanted the new demo to incorporate all the
updates (4-axis, HPGL routines, FeedRate overRide, etc..). It has now been
done, and the demo is uploaded. The demo is good until June30th/2001.

Thanks for your patience.
Art
http://users.andara.com/~fenerty/master.html

----- Original Message -----
From: "John Stevenson" <machines@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, April 15, 2001 2:26 PM
Subject: [CAD_CAM_EDM_DRO] Re: Master5 Feed Rate OverRide


> --- In CAD_CAM_EDM_DRO@e..., "Art Fenerty" <fenerty@h...> wrote:
> > Hi All:
> >
> > Master5 Release 1.61 now has Feed Rate OverRide. Within a week
> the Demo should be updated with this new feature. Doug Fortunes
> Breakout board with Potentiometer
> > control will soon be implemented. It will give you the ability to
> control feed rate from the machine with any pot 5k ->100k. This
> control will vary the speed from approx 10% to 200% overfeed.
> >
> > Note: Use this with caution. It is possible to go faster than your
> stepper motors permit.
> >
> > It will also be possible soon to import BMP,JPEG, etc for a
> photographic engraving direct from the photo. Or to translate photo's
> to G-Code.
> >
> > Art
> >
> > http://users.andara.com/~fenerty/master.html
>
> Art,
> The demo expired today.
> Have you over looked this ?
> JS.
> >
> >
> > [Non-text portions of this message have been removed]
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>