Re: Identify these Steppers
Posted by
yahoo@m...
on 2001-04-16 16:50:46 UTC
--- In CAD_CAM_EDM_DRO@y..., cla@m... wrote:
Your stepper is rated at 10.8Kg^cm holding torque, which is about the
equivalent of 150 oz/in. The modern equivalent would be a 232-180-SB
(my model number), which is 180 oz/in, needing only two amps.
Hope this helps.
Jon
specs at: http://www.mendonet.com/steppers/nema23.htm
> I've got a couple Sanyo Denki Step-Syn steppers model 103-746-1 butcan't
> find any spec. sheets for them. They are 3.4V @ 2.9A and appear tobe Nema
> 23 triple stacks. Can anybody point me to the specs. on these.Claton,
>
> Thanks Claton Cadmus
Your stepper is rated at 10.8Kg^cm holding torque, which is about the
equivalent of 150 oz/in. The modern equivalent would be a 232-180-SB
(my model number), which is 180 oz/in, needing only two amps.
Hope this helps.
Jon
specs at: http://www.mendonet.com/steppers/nema23.htm
Discussion Thread
cla@m...
2001-04-04 13:04:05 UTC
Identify these Steppers
yahoo@m...
2001-04-16 16:50:46 UTC
Re: Identify these Steppers