Re: [CAD_CAM_EDM_DRO] Machining information on a single cylinder engine, excellent info

Interesting!

You might be able to alleviate the "bending" problem on your castings by
altering the method you use for attaching sprues and gates.

If your making a LOT of engines, you'd probably benefit greatly from a
Dreammachine set up to machine four sides of a casting in one set up.

Smoke

> <A HREF="http://home.wxs.nl/~wakke007/engines/part1.htm">Click here: On

this

>page I will try to explain how I make my engines.</A>
>http://home.wxs.nl/~wakke007/engines/part1.htm
>
>An excellent 7 part source of how an engine is machined
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>