CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Milling machine stiffness

Posted by Joe Vicars
on 2001-04-30 06:07:20 UTC
The knuckle. (Where the head connects to the Ram)
That's why the Bigger machines have a "Rigid" (1 peice) Ram.

dave engvall wrote:

> Hi all,
> I just have to ask: on typical knee mills. i.e.
> BP sized, which part is least stiff...i.e spindle
> and head or table/knee.
> The answers should be fun.
> TIA
>
> Dave
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

dave engvall 2001-04-29 21:17:05 UTC Milling machine stiffness Joe Vicars 2001-04-30 06:07:20 UTC Re: [CAD_CAM_EDM_DRO] Milling machine stiffness Jon Elson 2001-05-01 17:11:45 UTC Re: [CAD_CAM_EDM_DRO] Milling machine stiffness