RE: [CAD_CAM_EDM_DRO] Recommend system for EMC

My EMC experience says it depends. Jon Elson tells us his servo based EMC
system runs great on a Pentium Classic 100. My experience with the stepper
versions say that you need a little more processor power. If you are running
steppermod a 200 mhz system seems to be about the minimum. If running
freqmod then a 333 or better seems to be more appropriate. If you need
really high pulse rates increase by 50%.

Your Mileage May Vary

Tim
[Denver, CO]

> -----Original Message-----
> what are the "minimum system requirements" to run the EMC BDI?
>
>
> FAQ: http://www.ktmarketing.com/faq.html