Re: [CAD_CAM_EDM_DRO] Pictures.
Posted by
Alan Marconett KM6VV
on 2001-05-05 13:44:55 UTC
Hi Henrik,
I just went through your pictures. Nice work! I see lots of excellent
workmanship there, from the EMI line filter on the control box, to the
tooling plate on on your mill.
I have some ball screw slides, and want to make a PCB/engraving mill.
One of these days...
Alan KM6VV
P.S. Thanks for posting!
Henrik Olsson wrote:
I just went through your pictures. Nice work! I see lots of excellent
workmanship there, from the EMI line filter on the control box, to the
tooling plate on on your mill.
I have some ball screw slides, and want to make a PCB/engraving mill.
One of these days...
Alan KM6VV
P.S. Thanks for posting!
Henrik Olsson wrote:
>
> Hi,
> I just created a folder called 'Henrik pictures' and uploaded a couple of
> pics of my miniature 'milling machine slash engraver slash PCB drill' - my
> first, nothing fancy..... Everything is buildt from scratch. The machine
> uses steppers from old printers driven by my homemade drives, ordinary ACME
> screws and nuts and a dremel for spindle.
> The engraving is done in white plexiglass sprayed with plack paint. Note the
> uneven surface of the plexiglass in lower left corner of the pic.
> Sorry for the bad quality of the pics.
>
> /Henrik Olsson. Sweden.
Discussion Thread
Henrik Olsson
2001-05-05 03:49:30 UTC
Pictures.
Alan Marconett KM6VV
2001-05-05 13:44:55 UTC
Re: [CAD_CAM_EDM_DRO] Pictures.
Marty Escarcega
2001-05-05 16:21:38 UTC
Re: [CAD_CAM_EDM_DRO] Pictures.
JanRwl@A...
2001-05-05 20:23:38 UTC
Re: [CAD_CAM_EDM_DRO] Pictures.
William Scalione
2001-05-05 20:41:10 UTC
Re: [CAD_CAM_EDM_DRO] Pictures.
JanRwl@A...
2001-05-05 21:26:32 UTC
Re: [CAD_CAM_EDM_DRO] Pictures.