Re: [CAD_CAM_EDM_DRO] Pictures.

Maybe I missed it. Whats the URL?
Marty

On 5 May 2001, at 13:44, Alan Marconett KM6VV wrote:

> Hi Henrik,
>
> I just went through your pictures. Nice work! I see lots of
> excellent workmanship there, from the EMI line filter on the control
> box, to the tooling plate on on your mill.
>
> I have some ball screw slides, and want to make a PCB/engraving mill.
> One of these days...
>
> Alan KM6VV
> P.S. Thanks for posting!
>
> Henrik Olsson wrote:
> >
> > Hi,
> > I just created a folder called 'Henrik pictures' and uploaded a
> > couple of pics of my miniature 'milling machine slash engraver slash
> > PCB drill' - my first, nothing fancy..... Everything is buildt from
> > scratch. The machine uses steppers from old printers driven by my
> > homemade drives, ordinary ACME screws and nuts and a dremel for
> > spindle. The engraving is done in white plexiglass sprayed with
> > plack paint. Note the uneven surface of the plexiglass in lower left
> > corner of the pic. Sorry for the bad quality of the pics.
> >
> > /Henrik Olsson. Sweden.
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>