CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] EMC and second Parallel port/BOSS control

Posted by Brian Pitt
on 2001-05-13 17:11:44 UTC
Hi Marty,

there is now
I just made a quickie page from some notes I've collected

check under "EMC documentation" at
http://www.mindspring.com/~pitt/

the graphics are a bit slow

Brian
PS
if anyone finds any horrific errors just sound off :-)



On Sunday 13 May 2001 12:22, you wrote:
> I was on:
> http://www.linuxcnc.org/handbook/index.html
> Seeing more "input" on my Series I conversion. Noted that it
> mentioned that EMC supports a second parallel port for:
>
> "Now you may not know this, but the bridgeportio system uses the
> auxiliary I/O port for some of its functions. Stuff like mist or flood
> coolant, spindle speed and direction, and estop
> state."
>
> Is there a site that gives the pinouts for the second port for these
> features?
>
> I know Tim G's site has them for the first port, but I don't recall
> seeing them for the second port....
>
> Thanks
> Marty

Discussion Thread

admin@a... 2001-05-10 19:08:49 UTC Info from Ah-ha! on BOSS's/Motors/HVdrivers Alan Marconett KM6VV 2001-05-10 19:51:38 UTC Re: [CAD_CAM_EDM_DRO] Info from Ah-ha! on BOSS's/Motors/HVdrivers Tim Goldstein 2001-05-11 07:02:50 UTC RE: [CAD_CAM_EDM_DRO] Info from Ah-ha! on BOSS's/Motors/HVdrivers mariss92705@y... 2001-05-11 13:11:17 UTC Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers admin@a... 2001-05-11 15:20:53 UTC Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers stratton@m... 2001-05-12 07:44:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers mariss92705@y... 2001-05-12 08:43:06 UTC Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers Ian Wright 2001-05-12 09:48:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers mariss92705@y... 2001-05-12 10:30:04 UTC Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers Marty Escarcega 2001-05-13 12:23:06 UTC EMC and second Parallel port/BOSS control Brian Pitt 2001-05-13 17:11:44 UTC Re: [CAD_CAM_EDM_DRO] EMC and second Parallel port/BOSS control JanRwl@A... 2001-05-13 18:43:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers admin@a... 2001-05-23 20:59:35 UTC Re: Info from Ah-ha! on BOSS's/Motors/HVdrivers