GEM-500PCN bedmill - CNC ready

mgrady wrote:

> website with some pics and info on GEM 500 G II and G III
> and the gem 600p with a bridgeport style head
> http://www.handyage.com.tw/pic/metal/4-1.htm

But even better is the GEM-500PCN at the bottom of that page
(order it without the expensive FAGOR 800MG-1 controller
and the motors of course !).

It has:
- 3 axis ballscrews already installed
- table is 240 x 920 mm (9.44" x 36.22")
- XYZ is 500mm x 350 x 450 mm ( 19.68" x 13.78" x 17.71")
- ISO 30 spindle nose
- 80-6000 spindle rpm
- spindle nose to table 60-510mm (2.36" - 20.07")
- throat of 310mm (12.20 ")


STANDARD ACCESSORIES

1. RS-232 Interface
2. Auto Lubrication Device
3. Ballscrew C5 Grade For 3 Axis
4. 3 Axis Slideway Coated With Turcite-B
5. Chip Tray & Table Top Splash Guard
6. Cutting Fluid Cooling System
7. Harden & Ground for 3 Axis Slideway
8. Halogen Working Light
9. Levelling Base
10. Tool Box & Tools
11. Controller: FAGOR 800MG-1

OPTIONAL ACCESSORIES:

1. Power Draw Bar
2. Overlap Dust Cover for Z Axis
3. Overlap Dust Cover for Y Axis
4. Full Guard
5. CE Standard

If a bunch of us gang up, they'll take the FAGOR and motors
off I'm sure. Perhaps it has linear encoders already installed too!

Doug Fortune
http://www.cncKITS.com