CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] RT802 DAC board

Posted by dave engvall
on 2001-05-23 09:29:01 UTC
Chris Stratton wrote:

>
> The problem - there is a black encapsulated power module on the end of
> the board which says "Analog Devices 949" that gets very, very hot -
> the paint is blistered. It appears to be a +5v to +/- something
> converter. When hot the outputs are about +/- 8v and unstable - which
> of course means the dac outputs are unpredictable. I am guessing it
> should be a +/- 12v supply. There is a seperate (-) 10v reference
> device, although it presumably gets its power from this module.

The 949 is a dc/dc converter. 5 in @ 0.6 A +/- 15 out @ 60 mA. @% regulation.

>
>
> Thanks for any ideas...
>
> Chris
>
> --
> Christopher C. Stratton, stratton@...
> Instrument Maker, Horn Player & Engineer
> 22 Adrian Street, Somerville, MA 02143
> http://www.mdc.net/~stratton
> NEW PHONE NUMBER: (617) 628-1062 home, 253-2606 MIT
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Chris Stratton 2001-05-23 08:48:00 UTC RT802 DAC board dave engvall 2001-05-23 09:29:01 UTC Re: [CAD_CAM_EDM_DRO] RT802 DAC board wanliker@a... 2001-05-23 11:07:21 UTC Re: [CAD_CAM_EDM_DRO] RT802 DAC board David Baggenstos 2001-05-23 12:13:42 UTC g-code shareware and 2D parts Jon Elson 2001-05-23 12:34:50 UTC Re: [CAD_CAM_EDM_DRO] RT802 DAC board Lee Studley 2001-05-23 14:45:38 UTC Re: RT802 DAC board Chris Stratton 2001-05-23 15:21:03 UTC Re: [CAD_CAM_EDM_DRO] Re: RT802 DAC board