Re: [CAD_CAM_EDM_DRO] RT802 DAC board
Posted by
wanliker@a...
on 2001-05-23 11:07:21 UTC
In a message dated 5/23/01 10:39:55 AM Mountain Daylight Time,
dengvall@... writes:
<< When hot the outputs are about +/- 8v and unstable - which
the other post this is a +- 15 volt output and running at 8 volts, means
leakage somewhere.
bill
dengvall@... writes:
<< When hot the outputs are about +/- 8v and unstable - which
> of course means the dac outputs are unpredictable. >>You might want to take a look for leaky capacitors on the output line. from
the other post this is a +- 15 volt output and running at 8 volts, means
leakage somewhere.
bill
Discussion Thread
Chris Stratton
2001-05-23 08:48:00 UTC
RT802 DAC board
dave engvall
2001-05-23 09:29:01 UTC
Re: [CAD_CAM_EDM_DRO] RT802 DAC board
wanliker@a...
2001-05-23 11:07:21 UTC
Re: [CAD_CAM_EDM_DRO] RT802 DAC board
David Baggenstos
2001-05-23 12:13:42 UTC
g-code shareware and 2D parts
Jon Elson
2001-05-23 12:34:50 UTC
Re: [CAD_CAM_EDM_DRO] RT802 DAC board
Lee Studley
2001-05-23 14:45:38 UTC
Re: RT802 DAC board
Chris Stratton
2001-05-23 15:21:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: RT802 DAC board