Re: noisy encoder signals.
Posted by
todmorg@h...
on 2001-05-31 19:30:34 UTC
Hi Tom-
US digital sells an encoder amplifier for line lengths up to 1000
feet for $13.00 each, or you can build them out of a 7404 ( Mariss
showed me how ). My encoder lines are 12' long and were giving me
nightmares until I added an amp.
Good luck!
Todd
-- In CAD_CAM_EDM_DRO@y..., "Tom Eldredge" <harmonyt@r...> wrote:
differential amplifier. Could you refresh my memory with the part
number of the transmitter/receiver IC or series?
US digital sells an encoder amplifier for line lengths up to 1000
feet for $13.00 each, or you can build them out of a 7404 ( Mariss
showed me how ). My encoder lines are 12' long and were giving me
nightmares until I added an amp.
Good luck!
Todd
-- In CAD_CAM_EDM_DRO@y..., "Tom Eldredge" <harmonyt@r...> wrote:
> Jon Elson,that may be picked up by encoder signal wires. Some sort of
>
> Question for you:
>
> At NAMES, you mentioned an IC that can be used to reduce the noise
differential amplifier. Could you refresh my memory with the part
number of the transmitter/receiver IC or series?
>
> Thanks again,
>
> Tom Eldredge
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
Tom Eldredge
2001-05-31 09:07:14 UTC
noisy encoder signals.
Jon Elson
2001-05-31 13:12:37 UTC
Re: [CAD_CAM_EDM_DRO] noisy encoder signals.
todmorg@h...
2001-05-31 19:30:34 UTC
Re: noisy encoder signals.
beer@s...
2001-06-06 11:04:05 UTC
Re: noisy encoder signals.
Tom Eldredge
2001-06-06 14:01:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: noisy encoder signals.