Re: [CAD_CAM_EDM_DRO] smd1

Actually why don't you down load the manual in PDF from their
site. Its free.

Garry

To: CAD_CAM_EDM_DRO@yahoogroups.com
From: Alan Marconett KM6VV <KM6VV@...>
Date sent: Wed, 13 Jun 2001 19:03:32 -0700
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] smd1

> Hi Iain,
>
> Try Ramsey at:
>
>
> http://www.ramseyelectronics.com/cgi-bin/commerce.exe?preadd=action&key=SMD1&reference=/cgi-bin/commerce.exe%3Fsearch%3Daction%26keywords%3Dstepper+motor%26sku%3D%26searchstart%3D0%26template%3DTemplates\Ramsey-SearchResults.html
>
> Oh, that's a little hard, so to to:
>
> http://ramseyelectronics.com/
>
> And do a keyword search for "stepper motor". You'll see the SMD-1
> picture, click on it. I briefly read the write up, it says:
>
> "An on-board clock generator is provided for easy hook-up-and-go
> operation or you can externally drive the kit for more exotic control."
>
> Which sounds encouraging. Don't know if it's step/dir 'tho. I assume
> it's single axis. 3 x $25!
>
> Alan KM6VV
> P.S. IMO, Dan's 3axis 2A driver (bipolar) for about $150 is a better
> deal! I KNOW it works with PC's, and drives steppers!
>
>
> hllrsr@... wrote:
> >
> > Guys,
> > Been looking through the archives for some information on the SMD-1
> > driver from Ramsey Electronics and couldn't find it.
> > So, can anybody tell me how many axis this has, and also how you can
> > connect it for computer control?
> >
> > I tried calling Ramsey, and the fellow on the phone told me, AND I
> > QUOTE:".. You'll have to order one and play with it.."
> > Not very helpful.
> > TIA
> >
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built syste

ms, for CAD, CAM, EDM, and DRO.

>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>