Re: [CAD_CAM_EDM_DRO] smd1

I called Ramsey a few years back when I was first getting into this,
and whatever kit they were offering at that point had only minimal
current capability, such as might be suitable for little floppy drive
steppers. It's possible this one is newer and more powerful, but I'd
check carefully.

Chris

> Try Ramsey at:
>
> http://www.ramseyelectronics.com/cgi-bin/commerce.exe?preadd=action&key=SMD1&reference=/cgi-bin/commerce.exe%3Fsearch%3Daction%26keywords%3Dstepper+motor%26sku%3D%26searchstart%3D0%26template%3DTemplates\Ramsey-SearchResults.html
>
> Oh, that's a little hard, so to to:
>
> http://ramseyelectronics.com/
>
> And do a keyword search for "stepper motor". You'll see the SMD-1
> picture, click on it. I briefly read the write up, it says:
>
> "An on-board clock generator is provided for easy hook-up-and-go
> operation or you can externally drive the kit for more exotic control."
>
> Which sounds encouraging. Don't know if it's step/dir 'tho. I assume
> it's single axis. 3 x $25!
>
> Alan KM6VV
> P.S. IMO, Dan's 3axis 2A driver (bipolar) for about $150 is a better
> deal! I KNOW it works with PC's, and drives steppers!
>
>
> hllrsr@... wrote:
> >
> > Guys,
> > Been looking through the archives for some information on the SMD-1
> > driver from Ramsey Electronics and couldn't find it.
> > So, can anybody tell me how many axis this has, and also how you can
> > connect it for computer control?
> >
> > I tried calling Ramsey, and the fellow on the phone told me, AND I
> > QUOTE:".. You'll have to order one and play with it.."
> > Not very helpful.
> > TIA
> >
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

--
Christopher C. Stratton, stratton@...
Instrument Maker, Horn Player & Engineer
22 Adrian Street, Somerville, MA 02143
http://www.mdc.net/~stratton
NEW PHONE NUMBER: (617) 628-1062 home, 253-2606 MIT