CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Price Check - Clausing Lathe

Posted by Marcus & Eva
on 2001-06-26 07:49:24 UTC
Hi Joe:
1900 bucks for a hunky lathe IN GOOD CONDITION!!! is a good price.
I don't think it matters too much what the brand is provided it is hefty
enough for real machining, and is in decent shape.
Sure beats a piece of junk straight out of the box for the same money.
Cheers

Marcus
-----Original Message-----
From: Joe Vicars <jvicars@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Monday, June 25, 2001 1:42 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Price Check - Clausing Lathe


>I think just a Clausing, and I'm not sure its a gear head. I would guess
>1970's vintage. I will have to give it a closer look tomorrow. About the
>same size as my Atlas 12 by 36 but alot more beefy. 1.125" hole through
the
>spindle where mine is 7/8" or 3/4".
>Thanks
>
>dougrasmussen@... wrote:
>
>> Joe,
>>
>> Are you sure it's a gear head? Clausing or Clausing-Colchester?
>>
>> Doug
>>
>> --- In CAD_CAM_EDM_DRO@y..., Joe Vicars <jvicars@c...> wrote:
>> > What's a good price for a 10 by 36 clausing gear head lathe with
>> cabinet
>> > stand?
>> > Reversible spindle, quick change gearbox, 3 jaw chuck
>> > Comes with quickchange toolholder.
>> > Guy is asking 1900.
>> >
>> > Thanks
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>
>> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>> Moderator: jmelson@... timg@... [Moderator]
>> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> bill,
>> List Manager
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

Joe Vicars 2001-06-25 11:39:53 UTC Price Check - Clausing Lathe dougrasmussen@c... 2001-06-25 12:18:20 UTC Re: Price Check - Clausing Lathe Joe Vicars 2001-06-25 13:42:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Price Check - Clausing Lathe Marcus & Eva 2001-06-26 07:49:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Price Check - Clausing Lathe brian 2001-06-27 12:41:05 UTC Re: [CAD_CAM_EDM_DRO] Price Check - Clausing Lathe