Re: [CAD_CAM_EDM_DRO] Vector / Ace Converter / Linux

Try the enclosed link for the CAD part of your question. As for the CAM
part, I'm relatively new to machining and have not have time to research
that aspect of it.

Wine will work okay with some programs, but I have not tried it with CAD or
CAM. So I can not say for sure. VMWare and WIN4LIN are two programs that
work with cad at least the program that I've been using only that you are
running a virtual machine which means that you'll need a fast setup to make
it bearable. Plus you are sharing the CPU with Linux which might have a
negative effect as to the fact that you can not do real time monitoring.

At 08:53 AM 7/5/2001 -0500, you wrote:

>Has anyone run Vector on a Linux machine with Wine or other windows
>emulator?
>
>How about Ace Converter under Dosemu?
>
>I have no MS Windows computers at home and would like to keep it that way
>but can't find any CAD or CAM programs that run under Linux.
>
>Terry
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/