CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Bridgeport

Posted by Tim Goldstein
on 2001-07-05 14:29:59 UTC
> -----Original Message-----
> For the stepper BOSS machines, you only need a PC, cnc program
> of your choice, and a stepper driver. But, it has to be a big stepper
> driver, 140 V at 9 A or so, to drive those big motors.

I had Bridgett (my series II which had steppers) connected to a Gecko G210a
at 62 VDC and the Y axis was good to about 80 ipm and Z was ok to about 30
ipm. X was a no go as the motor was damaged. Point is that reasonable
performance can be gotten with smaller (less expensive) drives.

Tim
[Denver, CO]

>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Discussion Thread

waqar sheikh 2001-07-05 03:42:09 UTC Re: Bridgeport Jon Elson 2001-07-05 11:01:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Tim Goldstein 2001-07-05 14:29:59 UTC RE: [CAD_CAM_EDM_DRO] Re: Bridgeport Jon Elson 2001-07-06 20:09:06 UTC Bridgeport machines@n... 2001-07-07 01:06:07 UTC Re: Bridgeport roodvoets 2003-05-31 06:38:17 UTC Bridgeport mgdcnc 2003-05-31 12:21:44 UTC Re: Bridgeport