Re: [CAD_CAM_EDM_DRO] Re: ACE Converter anomaly[Acad]

thanks Rich
you have made my day
regards
mariano

----- Original Message -----
From: "Rich D." <cmsteam@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, July 16, 2001 1:35 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: ACE Converter anomaly[Acad]


> Al,
> This confused me for a long time due to the awful instructions.
> The WCS is fixed, unmoveable. You must select the object or
> everything, select move then the origin point on the object.
> Now input 0,0 as new position. If the object was far from WCS 0,0,
> it will seem to disappear. Hit Extents and all will be ok.
> The UCS is just an on screen moveable temporary origin to facilitate
> object construction.
> RichD
>
> alenz@... wrote:
> >
> > --- In CAD_CAM_EDM_DRO@y..., "Rich D." <cmsteam@a...> wrote:
> > >(snip)
> > > The W-orld C-oordinate S-ystem is the actual positional info
> > > and is what will be converted to g-code. Be certain to set the
> > > origin and save the final .dxf when the *W* is in the UCS icon.
> > > RichD
> >
> > Rich, How do you set the WCS origin? I have to use the 'move'
> > command to move the drawing TO the WCS origin. The UCS origin
> > can be moved, but as you pointed out, it has no effect when
> > converting with Ace converter.
> > Thanks,
> > al
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>