Re: [CAD_CAM_EDM_DRO] oops - Re: Introduction & request for help

You should check how fast the cutter's torch has to move one certain
thicknesses of metal first. If you ask the people who make it they might be
able to give you a rough estimate. There isn't much point buying steppers
that are way too strong for what you need.

John

> Hi, also have a look at http://hometown.aol.com/drigotti/hobbycnc.htm for
> something very simular. I am using his setup for a small cnc drill/mill

type

> work. cul brian f.
> ----- Original Message -----
> From: "Weyland" <weyland@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Sunday, July 22, 2001 1:43 AM
> Subject: [CAD_CAM_EDM_DRO] oops - Re: Introduction & request for help
>
>
> > Damn~! Forgot to ask about this one as well.
> > http://206.96.14.115/stepper/sp3HT.htm
> >
> > Thanks,
> >
> > Weyland
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>