Re: emc final questions
Posted by
Ray
on 2001-07-26 08:40:40 UTC
From: whollid1@...
It is named skeleton.ngc and was written by Matt and others in an attempt
to get programs to start and end with a known view of the world.
for most of the motion modules. There are a few more odd things to fix up
and then there should be a new EMC release. I presume that Paul will
produce RPM's that will install the latest stuff on a BDI-2.04.
Ray
>Now that I have emc up and running I only have 2 glitches leftThere may be a sample modal start and end file in the programs directory.
>1: when i try to load in a g-code file I usually fill the first few
>lines with the modal codes I.E. g17,g21,g40,etc. <s>
It is named skeleton.ngc and was written by Matt and others in an attempt
to get programs to start and end with a known view of the world.
>2: with the bdi install on my 200 pentium, about every other time iYea, me! I believe that the relevant folk have gotten to the bottom of this
>try to do the first jog after starting the system/program I get a
>lockup so severe I have to do a power off reboot. Nothing
>works...mouse keys.. nothing. Anyone else had this!
for most of the motion modules. There are a few more odd things to fix up
and then there should be a new EMC release. I presume that Paul will
produce RPM's that will install the latest stuff on a BDI-2.04.
Ray