RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Posted by
Gail & Bryan Harries
on 2001-07-26 08:44:14 UTC
Scott,
have a look at this site/page and see what it matches up to...
http://www.newmantools.com/tech/taper.htm
Bryan
-----Original Message-----
From: Scott M. Thomas [mailto:scott@...]
Sent: Thursday, 26 July, 2001 11:12 AM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
I have a machine that uses Morse taper with a 3/8" drawbar. Are you sure
its not Morse?
-----Original Message-----
From: Mark Ehle [mailto:markehle@...]
Sent: Thursday, July 26, 2001 8:18 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Hello, All -
I have just inherited a Millwaukee #2 horizontal mill. Instead of a #40 or
#50 taper, it has a longer, smaller-diameter taper that looks like a morse
taper, but has a drawbar hole in the tooling that did come with it. The
gentleman that owned it said it was Brown and Sharp, but was not sure. Would
anybody be able to tell me for sure what it might be?
I am looking for some end mill adapters and Morse-to-B&S adapters. Where can
I find these parts?
Thanks!
Mark Ehle
Dowling, MI
NetZero Platinum
No Banner Ads and Unlimited Access
Sign Up Today - Only $9.95 per month!
http://www.netzero.net
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
have a look at this site/page and see what it matches up to...
http://www.newmantools.com/tech/taper.htm
Bryan
-----Original Message-----
From: Scott M. Thomas [mailto:scott@...]
Sent: Thursday, 26 July, 2001 11:12 AM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
I have a machine that uses Morse taper with a 3/8" drawbar. Are you sure
its not Morse?
-----Original Message-----
From: Mark Ehle [mailto:markehle@...]
Sent: Thursday, July 26, 2001 8:18 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Hello, All -
I have just inherited a Millwaukee #2 horizontal mill. Instead of a #40 or
#50 taper, it has a longer, smaller-diameter taper that looks like a morse
taper, but has a drawbar hole in the tooling that did come with it. The
gentleman that owned it said it was Brown and Sharp, but was not sure. Would
anybody be able to tell me for sure what it might be?
I am looking for some end mill adapters and Morse-to-B&S adapters. Where can
I find these parts?
Thanks!
Mark Ehle
Dowling, MI
NetZero Platinum
No Banner Ads and Unlimited Access
Sign Up Today - Only $9.95 per month!
http://www.netzero.net
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Mark Ehle
2001-07-26 06:44:51 UTC
B&S Taper (off topic a little bit)
Scott M. Thomas
2001-07-26 08:12:37 UTC
RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Gail & Bryan Harries
2001-07-26 08:44:14 UTC
RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
MARKEHLE
2001-07-26 09:37:18 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Gail & Bryan Harries
2001-07-26 10:30:21 UTC
RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Jon Elson
2001-07-26 10:32:56 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Jon Elson
2001-07-26 10:54:33 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Smoke
2001-07-26 11:52:07 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
ptengin@a...
2001-07-26 13:11:54 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
jesse
2001-07-26 14:37:46 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
MARKEHLE
2001-07-26 18:18:06 UTC
Re: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)
Garry & Maxine Foster
2001-07-26 19:02:12 UTC
RE: [CAD_CAM_EDM_DRO] B&S Taper (off topic a little bit)