Re: [CAD_CAM_EDM_DRO] Re: Radius Compensation---Leadin

Fred:

The latest kernal seems to store the D modally. I just ran a program
without it and it used the current tool.

Art

----- Original Message -----
From: "Jon Elson" <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, July 25, 2001 11:01 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Radius Compensation---Leadin


> Fred Smith wrote:
>
> > P.S. I still disagree technically with the authors of EMC that the D
> > call out should be required at the same time as the G41. It's call
> > out should be done at tool change time and remain in effect modally
> > whenever a G41 or G42 is encountered. Very sloppy IMHO.
>
> They apparently copied this from a particular Allen-Bradley document.
> I'm not even sure the AB actually requires this syntax, either.
>
> Jon
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>