Re: [CAD_CAM_EDM_DRO] Fanuk backlash compensation

Swen;
the emergency stop must be energised to write on some
parameters in the fanuc controller
regards
mariano

----- Original Message -----
From: "Sven Peter, TAD S.A." <peteryco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, August 01, 2001 11:35 PM
Subject: Re: [CAD_CAM_EDM_DRO] Fanuk backlash compensation


> Dear friends,
> you didn't hear from me the last weeks because I scraped
> the table of a 7 ton Hillier bedmill. My hole body still aches.
> Now that I have aligned the head and tightened the ballnut mounts
> I want to compensate the backlash of the directions but the control
> doesn't let me into the parameter settings.
> It is a Fanuk 11 series control. and the backlash compensation
> parameters
> are in number 1851.
> First you shall put in parameter 8000 a 1 into the PWE bit (last one),
> what I finally where able to do. But still the control tells me that the
> parameter is write protected.
>
> Who can help me on?
>
>
> By the way this is the machine I mentioned a month ago that it once was
> under
> military secret. And when it had to be reinitialized several years ago
> because
> the system fell out trying to get into the parameter settings.
> The owner had to get a special permit from Pentagon before Fanuk sold
> him
> the hardware key for this task.
> Any answer is very much welcome.
>
> Thanks a lot
> Sven Peter
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>