RE: [CAD_CAM_EDM_DRO] HELP ! on Westamp servo drives.

That sounds like a good plan, I'll have to see if I can borrow a DSO. Using
the controller to make manual jogs sounds safer too, then the controller can
respond to limit switches.

Thanks,

Ward M.

wardmerk@... <mailto:wardmerk@...>


#)
#)I used a DSO, so I only had to make one move, look at the trace and decide
#)what pot to tweak, and try again. I made the moves with manual jogs.
#)I think you'll quickly go nuts if you try to do it with a plain
#)oscilloscope,
#)as you need a trace of about 100 mSec / division. by the time the beam
#)hits the end of the screen, the picture is gone.
#)
#)Jon
#)
#)