Re: [CAD_CAM_EDM_DRO] Re: Another EDM Approach - Ref Digest Number 1521

please help me in making home made edm and send ur personal eamil.

shabbir


At 02:25 PM 7/30/01 -0300, you wrote:

>Hi, roland
>
>> I've had this in mind for some time but, being primarily a mechanical
>type,
>> haven't done anything about the electronics - However, I do have a Wire
>EDM
>> machine and a Ram EDM machine available for experimentation - If anyone
>> would like to have a cooperative arrangement to develop these systems I
>> would be glad to offer the use of the equipment for testing purposes -
>
>
> I am not exactly a electronics Guru, specially regarding power
>electronics but if the cooperative effort gets more people interested I can
>get the microcontroller part of the project. That is what I do for a living
>so I can control pretty easily pulses in the tenths of microseconds range
>under software control if the power guys need control. I am available for
>the project...
>
>Best regards,
>Alexandre Guimaraes
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>