Re: [CAD_CAM_EDM_DRO] Re: Another EDM Approach - Ref Digest Number 1521
Posted by
Alexandre Guimarães
on 2001-07-30 10:25:17 UTC
Hi, roland
electronics but if the cooperative effort gets more people interested I can
get the microcontroller part of the project. That is what I do for a living
so I can control pretty easily pulses in the tenths of microseconds range
under software control if the power guys need control. I am available for
the project...
Best regards,
Alexandre Guimaraes
> I've had this in mind for some time but, being primarily a mechanicaltype,
> haven't done anything about the electronics - However, I do have a WireEDM
> machine and a Ram EDM machine available for experimentation - If anyoneI am not exactly a electronics Guru, specially regarding power
> would like to have a cooperative arrangement to develop these systems I
> would be glad to offer the use of the equipment for testing purposes -
electronics but if the cooperative effort gets more people interested I can
get the microcontroller part of the project. That is what I do for a living
so I can control pretty easily pulses in the tenths of microseconds range
under software control if the power guys need control. I am available for
the project...
Best regards,
Alexandre Guimaraes
Discussion Thread
Roland Friestad
2001-07-30 06:52:05 UTC
Re: Another EDM Approach - Ref Digest Number 1521
Weyland
2001-07-30 07:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another EDM Approach - Ref Digest Number 1521
Alexandre Guimarães
2001-07-30 10:25:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another EDM Approach - Ref Digest Number 1521
M. SHABBIR MOGHUL
2001-08-01 21:08:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another EDM Approach - Ref Digest Number 1521
M. SHABBIR MOGHUL
2001-08-03 13:03:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another EDM Approach - Ref Digest Number 1521