CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: EMC Continuous Contouring

Posted by Ray
on 2001-08-04 19:25:25 UTC
From: Jon Elson <elson@...>

>You might try out one of my programs :

>http://pico-systems.com/gcode.html

These programs and a couple others are available on the BDI CD. Click on
the CP1 icon and select mill circle under the select mop menu item. Fill
in the sizes and you're there. Don't ask why they are called mop's.

Ray

Discussion Thread

andy@o... 2001-08-03 11:07:58 UTC EMC Continuous Contouring jguenther@v... 2001-08-03 11:23:13 UTC RE: [CAD_CAM_EDM_DRO] EMC Continuous Contouring andy@o... 2001-08-03 12:41:05 UTC Re: EMC Continuous Contouring jguenther@v... 2001-08-03 12:54:18 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC Continuous Contouring andy@o... 2001-08-03 13:30:03 UTC Re: EMC Continuous Contouring Alan Marconett KM6VV 2001-08-03 15:19:52 UTC Re: [CAD_CAM_EDM_DRO] EMC Continuous Contouring Jon Elson 2001-08-03 21:38:11 UTC Re: [CAD_CAM_EDM_DRO] EMC Continuous Contouring Jon Elson 2001-08-03 22:02:02 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC Continuous Contouring Andy Olney 2001-08-03 22:16:06 UTC RE: [CAD_CAM_EDM_DRO] EMC Continuous Contouring Andy Olney 2001-08-03 22:30:21 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC Continuous Contouring Jon Elson 2001-08-04 10:23:46 UTC Re: [CAD_CAM_EDM_DRO] EMC Continuous Contouring Ray 2001-08-04 19:25:25 UTC Re: Re: EMC Continuous Contouring