Re: rtpatch

PS.
It loaded the schedule and hung on the motion module
Darrell

----- Original Message -----
From: Darrell Gehlsen <darrell@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Friday, September 24, 1999 8:42 PM
Subject: Re: [CAD_CAM_EDM_DRO] rtpatch


> I finally got the rtpatch loaded and downloaded the Aug 30 EMC file from
> Tim's web site. I also downloaded Matt's 64stepper.ini and run.64step.378
> files and changed the 0x3F00000 line to 0x1F00000 for my 32 meg system.
> Everything seemed to install no problem but when I ran run.64step378, the
> computer locked up and it looks like I will have to turn the power off to
> get it back.
> Darrell
>
> ----- Original Message -----
> From: Jon Elson <jmelson@...>
> To: <CAD_CAM_EDM_DRO@onelist.com>
> Sent: Friday, September 24, 1999 3:34 PM
> Subject: Re: [CAD_CAM_EDM_DRO] rtpatch
>
>
> > From: Jon Elson <jmelson@...>
> >
> >
> >
> > Darrell Gehlsen wrote:
> >
> > > From: "Darrell Gehlsen" <darrell@...>
> > >
> > > Well I downloaded everything for the rtpatch and followed your
> instructions and the first time through when I rebooted I got a kernel
> panic. So I reinstalled linux 5.2 kernel 2.0.36-0.7 using the hard drive
> format on your instructions, reinstalled the rtpatch and now it can not
open
> an initial console and hangs on both rtlinux and linux.
> >
> > Your old kernel should still be out there in the /boot directory. When
it
> says boot:
> > you can enter the tab key, and it will show the names of all known
kernels
> installed in LILO.
> > If there are other kernels there, try one of the other ones.
> > (Sounds like you have at least 2 kernels there, is that all?) I think
> maybe one of the partitions didn't get formatted
> > properly (or the partition with /bin, /root and or /sbin got cleared).
> >
> > Jon
> >
> > > > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> > To Unsubscribe, read archives, change to or from digest.
> > Go to: http://www.onelist.com/isregistered.cgi
> > Log on, and you will go to Member Center, and you can make changes
there.
> > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > bill,
> > List Manager
> >
>