Re: [CAD_CAM_EDM_DRO] Re: Stepper motors as encoders

Hi all
i have dro box but not scales. it made from usa. how type encoder will be
use for this??

shabbir

At 12:00 PM 8/19/01 +0000, you wrote:

>Grant,
>
>Yes, that was the article... And six or seven years ago it might have made

sense top try to make an encoder from a stepper. Time marches on, things
change... NOW encoders are SO available surplus and even new they are so
inexpensive (US Digital) as to make sucvh effort only worth the mental
exercise, IMO.

>
>Hope this helps.
>
>Ballendo
>
>
>
>--- In CAD_CAM_EDM_DRO@y..., "Ian Wright" <Ian@i...> wrote:
>> HI,
>>
>> Sounds like we're back to modified mouse electronics again here - <snip>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>