CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Harley Logo

on 2001-08-26 16:26:17 UTC
Thanks, I've been looking for a DXF of this for a while.
Where did you get it? I've been thinking of getting one of
those logo CD's

Bill

> In an post on another list someone was asking about a Harley Logo.
> I've put the DXF file and the .TAP toolfile on my website
> The links are:-
>
> http://homepage.ntlworld.com/machines/harley.tap
> and
> http://homepage.ntlworld.com/machines/harley.dxf
>
> The toolfile is for a logo about 6" high with a clearance hight of
> 0.130" and a cut depth of 50 thou. You will need to add all the
> start / stop routines for your machine.
> This is a drawn logo and not a scanned one so it's all lines and arcs
> and not all short lines.
> Feel free to do with this as you please.
> Have fun
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

machines@n... 2001-08-26 14:49:14 UTC Harley Logo William Scalione 2001-08-26 16:26:17 UTC Re: [CAD_CAM_EDM_DRO] Harley Logo