Re: [CAD_CAM_EDM_DRO] DB9, DB15, DB25 cutout drawings / dimensions

Take a look at the following files in the file section:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/CIRCUITS/rs232.gif

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/CIRCUITS/rs232_dimen.gif

Be sure to get the entire URL if it wraps lines......

Mike

jguenthe wrote:

>
> Hi,
>
> Does anyone have drawings / dimensions for DB9, DB15 and DB25 connector
> cutouts? I particularly need the DB9 and DB25 drawings / dimensions. DXF,
> DWG or even g-code for these would be greatly appreciated.
>
> John Guenther
> 'Ye Olde Pen Maker'
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/