CAD CAM EDM DRO - Yahoo Group Archive

Re: Optimizing cutting paths, was Traveling Salesman Joke

Posted by cncdxf@a...
on 2001-08-31 04:20:15 UTC
Hi Mark,
Could you run ACE on the Harley file and let me
know the settings you use. I tried the ACE on the file
and I get large circles coming out of the piece.

Bob






--- In CAD_CAM_EDM_DRO@y..., Mark Fraser <mfraser@h...> wrote:
> I'm pretty impressed by Doug Yeager's ACE converter, now available
for
> free under GPL.
>
> ACE seems to optimize the path quite nicely! I exported a
particularly
> messy dxf file, with no particular orientation of line segments, and
> while
> ACE worked for quite a few minutes creating the code, it did a great
> job of minimizing dead-air. Even finished the cut at a point
nearest
> the
> starting point.
>
> Give it a try, look at all the capabilities (it'll let you
decide
> max 'z' cut,
> and how far above the workpiece to retract for fast moves.
>
> Happy user and customer for both ACE and CNCPro /mark

Discussion Thread

IMService 2001-08-30 05:56:23 UTC Optimizing cutting paths, was Traveling Salesman Joke dkowalcz@d... 2001-08-30 06:13:51 UTC Re: Optimizing cutting paths, was Traveling Salesman Joke Alan Marconett KM6VV 2001-08-30 13:22:39 UTC Re: Optimizing cutting paths, was Traveling Salesman Joke machines@n... 2001-08-30 13:58:46 UTC Re: Optimizing cutting paths, was Traveling Salesman Joke Mark Fraser 2001-08-30 19:40:56 UTC Optimizing cutting paths, was Traveling Salesman Joke cncdxf@a... 2001-08-31 04:20:15 UTC Re: Optimizing cutting paths, was Traveling Salesman Joke cncdxf@a... 2001-08-31 05:19:30 UTC Re: Optimizing cutting paths, was Traveling Salesman Joke cncdxf@a... 2001-08-31 07:22:20 UTC Re: Optimizing cutting paths, was Traveling Salesman Joke rab@r... 2001-08-31 07:47:47 UTC Contour Machining, was Optimizing cutting paths, was Traveling Salesman Fred Smith 2001-08-31 09:10:56 UTC Re: Contour Machining, was Optimizing cutting paths, was Traveling Salesman machines@n... 2001-08-31 09:41:53 UTC Re: Contour Machining, was Optimizing cutting paths, was Traveling Salesman rab@r... 2001-09-01 01:50:55 UTC Re: Contour Machining, was Optimizing cutting paths, was Traveling Salesman