RE: [CAD_CAM_EDM_DRO] Suggestions for cnc software, with cutter r adius compensation?

I AM CURRENTLY EXPERIMENTING WITH EMC, YOU MAY TRY THAT

-----Original Message-----
From: tom.kay@... [mailto:tom.kay@...]
Sent: Friday, August 31, 2001 6:02 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Suggestions for cnc software, with cutter
radius compensation?


Hello

I am looking for some fairly low-cost cnc software with tool radius
compensation. Yeager automation (cncpro) does not offer this, and I
was planning to download a copy of that program. I still might if I
cannot find some hobby-type software with this feature. I suspect,
from reading other comments, that cncpro is pretty good.

I'd like to have the radius compensation, if possible, because I think
it would be easier to plan out the tool path, and then use the G-42
compensation to just cut inside the tool path, and I don't cut out too
big of a pocket.

Any suggestions? Thanks, Tom.


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/