Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints
Posted by
Eric Keller
on 2001-09-01 15:11:59 UTC
I'd use skate bearings.
Eric
Eric
> Regarding the hexapod universal attachment points
> (six at the spindle platform, six at the frame),
> for quite a while I held off building one because
> I had the mindset that, for the universal joint,
> I'd be using a small car driveshaft universal.
Discussion Thread
Doug Fortune
2001-09-01 14:36:12 UTC
hexapod universals - 1/2" socket universal joints
Eric Keller
2001-09-01 15:11:59 UTC
Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints
Gail & Bryan Harries
2001-09-01 15:26:55 UTC
RE: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints
wanliker@a...
2001-09-01 16:33:28 UTC
Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints
Doug Fortune
2001-09-01 18:42:34 UTC
Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints