CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints

Posted by wanliker@a...
on 2001-09-01 16:33:28 UTC
In a message dated 9/1/2001 3:28:02 PM Pacific Daylight Time,
gab@... writes:


> you could look at those for steering shafts... they still have
> needle bearings etc, and are quite a bit smaller...
>

The older Volvo's had some nice ones. bolted onto a round shaft. with two
flats, and a notch for the bolt. Compact, and cheap in junk yards. Used
them on my mud buggy years ago.
bill


[Non-text portions of this message have been removed]

Discussion Thread

Doug Fortune 2001-09-01 14:36:12 UTC hexapod universals - 1/2" socket universal joints Eric Keller 2001-09-01 15:11:59 UTC Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints Gail & Bryan Harries 2001-09-01 15:26:55 UTC RE: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints wanliker@a... 2001-09-01 16:33:28 UTC Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints Doug Fortune 2001-09-01 18:42:34 UTC Re: [CAD_CAM_EDM_DRO] hexapod universals - 1/2" socket universal joints