RE: [CAD_CAM_EDM_DRO] Part needed

HI all
if we use mouse 2 axis encoder for dro encoder. what will be happened?

shabbir


At 04:59 PM 9/3/01 -0600, you wrote:

>
>Murray
>This is what I am making using special hall effect sensor. It will count
>the pulses of a magnetic ring or you can use a single magnet to get one
>pulse
>per revolution. This unit with be totally independent with a display for
>each
>axis. Estimated cost per axis $60.00.
>
>Derek B.
>
>Hello:
>
>Any one have a rotary digital counter they can spare? (one turn of shaft
>increments counter by one digit) Mechanical (Veeder-Root 1239 or Redington
>29) or electronic ok.
>
>Thanks
>
>Murray
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>