Re: [CAD_CAM_EDM_DRO] booting into DOS

Hi Zoran, Donn, Jon E:
Thank you very much for your help. It's done and it works!!
Cheers
Marcus
-----Original Message-----
From: Zoran A. Scepanovic <zasto@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Friday, September 07, 2001 3:46 AM
Subject: RE: [CAD_CAM_EDM_DRO] booting into DOS

>The best way to boot into DOS:
>
>1) Change the attributes of MSDOS.SYS file which resides in root directory
>so that it is NOT hidden NOT system and NOT READ ONLY.
>
>2) Use your favorite text editor to add the following lines to the
>[Options]section:
> BootMenu=1
> BootMenuDefault=1
> BootMenuDelay=10
>
>The first line turns on the boot menu at the startup
>The second line sets the default option to Normal (you may put here the
>value which points to Command Prompt Safe Mode (which bypases the
>AUTOEXEC.BAT and CONFIG.SYS if you need the TSR clean boot) or Command
>Prompt (if you need some of your TSR's to be loaded)
>The third line sets the time delay for how long the Boot Menu will wait for
>you to manualy choose the desired option before it boots thew computer to
>the mode pointed in the BootMenuBefault line.
>
>3) set back the attributes of MSDOS.SYS and reboot your computer.
>
>HTH
>
>Zoran A. Scepanovic
>ZASto@...
>
>-----Original Message-----
>From: Marcus & Eva [mailto:implmex@...]
>Sent: Friday, September 07, 2001 03:38
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: [CAD_CAM_EDM_DRO] booting into DOS
>
>
>Hi all:
> Can any of you help me with a small boot problem?
>I need a Windows 95 machine to boot up into DOS instead of Windows 95.
>Do I edit a line in autoexec.bat or command.com? or maybe win.ini?
>Any suggestions will be greatly appreciated.
>Cheers
>
>Marcus
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>