Re: linux install
Posted by
Ernst Aardal
on 1999-10-06 23:17:46 UTC
Excuse for asking, but does anybody know where to find a ISO imagefile
for redhat 5.2 with the correct RT patch that I need for setting up EMC ?
It looks like it is only 6.x tat is available now as ISO image.
Thanks
TheDragonPit wrote:
for redhat 5.2 with the correct RT patch that I need for setting up EMC ?
It looks like it is only 6.x tat is available now as ISO image.
Thanks
TheDragonPit wrote:
> From: "TheDragonPit" <dragonpit@...>
>
> Terry ,
> I partitioned 10 megs for dos so I can still get on my network and run the
> machine controls
> I'm using on it for now, that left me with 490 megs to play with.
> it will sort of be for just control I run a telescope from it to.
> I'll setup one of the other boxes later with linux for a full install
> this is really just a try out to see if I can get it to install on a
> thinkpad I'm using
> one of my old 486 dx4100's to try it on.
>
> Thanks
> Henry ( Wood Dragon )
> ----- Original Message -----
> From: Terry L. Ridder <terrylr@...>
> To: <CAD_CAM_EDM_DRO@onelist.com>
> Sent: Wednesday, October 06, 1999 9:23 PM
> Subject: Re: [CAD_CAM_EDM_DRO] linux install
>
> > From: "Terry L. Ridder" <terrylr@...>
> >
> > hello;
> >
> > please forgive the lack of capital letters and any typographical
> > errors. i am recoverying from left shoulder surgery and typing
> > one-handed.
> >
> > this would depend on if the machine is standalone
> > and used only for controlling, or if this would
> > also be the development machine.
> >
> > have never tried it but in theory you could fit
> > everything on a 100 megabyte zip drive. this would
> > be assuming that you would never need swap space.
> >
> > figure that you could fit everything in 500 megabytes
> > with a minimal linux system.
> >
> > figure a small development machine would fit in
> > 2 gigabytes. this would give you plenty of room
> > for source files.
> >
>
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
Discussion Thread
TheDragonPit
1999-10-06 18:39:57 UTC
linux install
Terry L. Ridder
1999-10-06 19:23:02 UTC
Re: linux install
TheDragonPit
1999-10-06 22:22:42 UTC
Re: linux install
Ernst Aardal
1999-10-06 23:17:46 UTC
Re: linux install
Jon Elson
1999-10-07 00:26:50 UTC
Re: linux install
Robert Bachman
1999-10-07 07:40:02 UTC
Re: linux install