CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Hexapod design drawings

Posted by Ray
on 2001-09-22 11:36:01 UTC
Rab

What we were running was the Circle Diamond Square program(cds.ngc) that is
a standard test program that ships with most of the software. It is
RS274NGC code. We were not real certain about how much of the axis stuff
beyond 3 had been included at that time so we didn't try any a,b,or c stuff.

It is mostly in there now and I can plot some tool motions in all these
axes. Wish I had a machine ready.

Ray

From: rab@...
<s>following on from that link, this link may be useful for anyone else
>interested:
>http://www.isd.cme.nist.gov/personnel/kramer/publications.html#canon
>
>How did you generate the G-Code for the test run, was it in the
>format X,Y,Z,A,B,C ?
>
>Rab

Discussion Thread

machines@n... 2001-09-09 18:16:37 UTC Hexapod design drawings Doug Fortune 2001-09-09 22:07:06 UTC Re: [CAD_CAM_EDM_DRO] Hexapod design drawings rab@r... 2001-09-09 23:49:34 UTC Re: Hexapod design drawings Doug Fortune 2001-09-10 02:13:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Hexapod design drawings rab@r... 2001-09-10 14:15:12 UTC Re: Hexapod design drawings Andrew Werby 2001-09-10 14:52:49 UTC Re:Hexapod design drawings Doug Fortune 2001-09-10 19:15:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Hexapod design drawings rab@r... 2001-09-12 15:04:43 UTC Re: Hexapod design drawings jhtkcarn@a... 2001-09-14 11:50:47 UTC Re: Hexapod design drawings jhtkcarn@a... 2001-09-18 09:31:03 UTC Re: Hexapod design drawings Ray 2001-09-19 05:32:21 UTC Re: Hexapod design drawings rab@r... 2001-09-19 15:52:10 UTC Re: Hexapod design drawings Ray 2001-09-19 20:02:25 UTC Re: Re: Hexapod design drawings rab@r... 2001-09-21 02:43:30 UTC Re: Hexapod design drawings Ray 2001-09-22 11:36:01 UTC Re: Re: Hexapod design drawings