Re: [CAD_CAM_EDM_DRO] DXF to G-Code and HPGL to G-Code Software

hi Roland Friestad
how r u?
i m fine .
thanks for link and ur offer.
first i try to download it if there will be error then i will ask u for cd.
thanks again.

shabbir
http://groups.yahoo.com/group/sincere_friendship
At 05:47 PM 9/23/01 -0500, you wrote:

>A while back there was some discussion of DXF to G-Code conversion and what
>software was available -
>
>I've been working for the last several years with Turner Technologies, a
>small company in the UK that is building a CNC controller targeted to the
>small shop and educational markets -
>
>A recent addition to the system software includes DXF to G-Code conversion
>as well as HPGL to G-Code conversion -
>
>For those of you who are interested in trying this out for yourself the
>operating system software is available as a free download from the Turner
>Technologies web site -
>
>Go to www.turnertec.com
>
>Click on "products"
>
>Click on "download software"
>
>There are a few questions to answer and the software is downloaded as a
>single file named "setupex.exe" and its size is a little over 8 megabytes
>- Executing the file will install the software on any Windows 95, 98, 2000
>or NT system -
>
>As an alternative I can burn a CD-Rom and mail it to you for $10 if you
>don't want to download the software -
>
>Roland Friestad <cardinal.eng@...>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>